This pushrod tube seal, part number 113 109 345A, is for the outer location of the push rod tube on 83-92 Vanagon models with a waterboxer engine and also goes on the inner and outer locations on 63-71 Transporter models with a type 1 engine.

This distributor drive gear spacer shim, part number 111105235A, is used in transporter models from 1955 to 1979.

2 needed

Fits 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1962, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979

This breather tube elbow, part number 021129637C, fits transporter models 1968-1979 as the intake manifold elbow for air vacuum and as the fuel tank breather outlet for 1972-1973 transporters.

1 needed

Fits 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979

This oil strainer, part number 111 115 175B, is used to strain any contaminants out of your oil on 70-71 Transporter models as well as many other air cooled vehicles.

1 needed.

Fits 1970, and 1971 models.

Some waviness to the screen is to be expected from the manufacturer.

This German-made Hella oil pressure switch, part number 021 919 081B, is for every 50-83 Type 2 Bus & Vanagon air-cooled engine. It's range is .15-.45 bar, The German Hella brand lasts a long time and gives the correct reading. This is a crucial part and worth the extra money. It fits 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982 and 1983 models.