This official VW clip, part number 823 823 595, secures a fuel tank breather tube to the body on every Vanagon. It fits 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

This item, part number N 0102018, has multiple applications.

Vanagon 80-83 air-cooled - used to secure the thermostat cable to the thermostat flaps - 1 needed
Vanagon 80-92 - used to plug the fuel pressure test port on the fuel system - 1 needed

Supersedes: N0102017

It fits 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

This clip, part number 191 906 276, secures the fuel injection computer (ECU) mounting bracket under the back seat on every Vanagon with a Waterboxer 2.1L engine. It fits 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

3 needed

This official VW speed nut, part number 155 905 370, has multiple applications.

Vanagon 80-92 - pressed into body for front turn signal screw attachment point - 2 needed per turn signal

Vanagon 86-92 - pressed into body behind right tail light for double relay plate screw attachment point - 2 needed

It fits 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

This grommet, part number 211 611 833D, has multiple applications.

Vanagon - Fuel filler to fuel filler breather tube - 1 needed

Vanagon - Brake booster elbow to vacuum tube - 1 needed

Vanagon - Vacuum tube to vacuum check valve - 1 needed

It fits 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

This Fuel Sender Seal, part number 113 919 313A, is used to seal between the fuel sender and tank on all Vanagon and Transporter between 73-91. If you are looking for a Syncro seal please see 251 919 133.

1 Needed

Fits 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992

This NGK spark plug, part number N 01781126, is for a 72-83 air-cooled Transporter or Vanagon. This comes with an unnecessary connector screwed on the top (where the plug wire goes on), so make sure to remove it before installation.

This official VW M6 nut plate, part number 251 813 599, secures the fuel filter and fuel filter bracket to the frame rail on every 85-92 Vanagon with a waterboxer engine. It fits 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

This VITON grommet, part number N 90100501, seals the roll over valve into the top of the fuel expansion tank on every Vanagon, and in the top of the fuel tank on every Syncro.

This superior VITON fuel tank grommet, part number N 90100401, is for the fuel tank balance tube 251201147B and the fuel filler breather tube 251201166 to insert into on every Vanagon fuel tank. It fits 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

This official VW gasket, part number 025 129 683, goes between the air flow meter and the air filter housing on every 86-92 Vanagon with a 2.1L waterboxer engine.

This 3.3mm vacuum hose, part number 517 312 579 71, is made of silicone. We highly suggest this silicone version, however we also carry the original braided vacuum hose. Sold by the meter.

Supersedes: N0180682; N0203535; N0203531; N203531

This fuel filter, part number 133 133 511, goes on every 75-85 Type 2 Bus & Vanagon. Some Vanagons which normally take this early square filter (located before the fuel pump) have been retrofitted to take the later fuel filter, so check before ordering. It fits 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984 and 1985 models.

This gasket, part number 251 201 557, seals the 2wd gas cap or the Syncro gas cap to the fuel filler neck on every Vanagon. You must disassemble the fuel cap to install it. It fits 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

This seal, part number 251 919 133, goes between the fuel level sender and the fuel (gas) tank, and between the fuel tank and the inner mounting flange on every Vanagon Syncro. It fits 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

2 needed

This German-made housing, part number 251 201 117 01C, goes into the body to support the fuel filler neck on every 2wd Vanagon. It fits 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

1 needed

This seal, part number 251 201 139, has multiple applications.

Vanagon 80-83 - goes between the tank and fuel filler neck up to VIN 24-D-114 612 - 1 needed

Vanagon Pickup Syncro - goes between the tank and fuel filler neck - 1 needed

It fits 1980, 1981, 1982, 1983, 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

This official VW breather tube, part number 251 201 167B, connects the metal nipple on the top of the fuel tank to the rear nipple on the fuel expansion tank on every 2wd Vanagon from Vin A 0090 385 and on. We also carry the front fuel tank breather tube. It fits 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

2 needed per tank

This official VW breather tube, part number 251 201 169B, connects the metal nipple on the top of the fuel tank to the front nipple on the fuel expansion tank on every 2wd Vanagon from Vin A 0090 385 and on. We also carry the rear fuel tank breather tube. It fits 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

This fuel filter, part number 1H0 201 511A, is for every 86-92 Vanagon. Some 80-85 Vanagons which normally take the square filter located before the pump have been retrofitted to take the later fuel filter, so check before ordering. It fits 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

1 needed

For better filtration, we like to retrofit this fuel filter on all early Vanagons. In addition to the filter you will need: fuel tank adapter, fuel filter bracket, nut plate, screw, fuel hose (.2m), fuel hose (.2m), clamp (6), clamp (2)

Depending on stock you may receive one of the following filters known as a Bosch 71028 Steel bodied or F5264 Aluminum bodied, unfortunately due to pricing and availability we must stock these two technically identical offerings although the aluminum F5264 is 24mm longer.

This fuel hose, part number N 90099603, has multiple applications. This 5.5mm hose is amazing quality, and in 17 years have never had to warranty it. Worth the extra money for something so important. Sold in 1 meter increments.

Vanagon fuel tank breather hose - 1 needed

Type 2 Bus & Type 1 - A high-quality replacement for all failure-prone braided fuel hoses

It fits 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

This official VW fuel hose, part number N 02035327, is the original braided style. If you don't care about originality, we highly suggest the 3.3mm silicone vacuum hose instead of this. If you must have the original braided fuel hose, this is the best option, as we've had problems with the aftermarket brands splitting and leaking. Sold by the meter.

Supersedes: N0180682; N0203535; N0203531; N203531

This rubber fuel filler neck, part number 251 201 119D, attaches the metal fuel filler tube to the fuel filler neck housing on every 80-83 Vanagon with an air-cooled engine and some 1.9 waterboxer engines that use the larger style metal filler neck. It fits 1980, 1981, 1982, and 1983 models. The screws to secure this could be either a machine screw (443877722), or a sheetmetal screw (N0139649).

1 needed

This item, part number 251 201 139A, is a rubber fuel filler neck seal which is for every 85-92 Vanagon as well as the 84 with California emissions from Vin D-114 613 and on. We've recently run into some brand issues on these but purchase with confidence as we've tried them all and only provide the best quality parts available.

This official VW rubber isolator, part number 113 142 355B, is for the Vanagon fuel pump bracket and high pressure power steering hose bracket. It fits 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

This official VW valve, part number 251 201 311B, is in the top of each fuel expansion tank on every Vanagon, and in the top of the fuel tank on every Syncro. It fits 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

1 needed per tank

This temperature sensor, part number 022 906 041A, gives reading to the fuel injection system to help control the mixture. It threads into the cylinder head on a 74-83 air-cooled Type 2 Bus or Vanagon. It fits 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982 and 1983 models.

This oxygen sensor heat shield, part number 035 906 274, is used on every Vanagon with a 2.1L waterboxer engine. It fits 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

1 needed

Supersedes: 025131781

This fuel filler breather tube, part number 251 201 166, connects to the fuel filler neck (using this grommet) and snaps into the fuel tank grommet on every 83-92 Vanagon. It has the pressed fitting on the end and is an excellent match to the original. It fits 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.

1 needed

This German-made gas cap, part number 251 201 551H, is for every Vanagon Syncro. Comes with lock and keys. It fits 1986, 1987, 1988, 1989, 1990, 1991 and 1992 models.